|
|
Dimensioning of Supporting Constructions for MV Overhead Lines
Křepela, Pavel ; Novotný, Jan (referee) ; Orságová, Jaroslava (advisor)
The reason of supporting constructions is to transfer all power activity and fulfill all requirements on safe operation of electrical grid. This bachelor’s thesis deals with designing of supporting constructions of the overhead line MV. The main task is to acquire knowledges about single parts of supporting constructions and to describe steps of power effects calculation according to current legislation. The outcome is a simple software application for supporting constructions design from power effect viewpoint.
|
|
|
Wellness hotel
Bambas, Vratislav ; Jelínek, Petr (referee) ; Petříček, Tomáš (advisor)
Newly built Wellness hotel. The building is partially basement. The building has three parts. The central part is made of reinforced concrete skeleton and has five aboveground floors. This part serves as the main entrance hall and staircase. The side tracts have four aboveground floors and their support system is a transverse wall, brick, from the system Porotherm. In the basement there is a swimming pool and hotel facilities. There is located a restaurant too. On the second floor there are rooms, a gym and services. On the top floor there are only hotel rooms. The building is based on thecontinous footings. Roofing is made arched trusses.
|
|
|
Office Centre
Ďureje, Andrej ; Šmak, Milan (referee) ; Pilgr, Milan (advisor)
The content of diploma thesis is designing, project development and static estimation of the supporting steel structure in two different variants of the atypical office building (business center). The object is located in densely built-up location in the Brno. The building is designed as a seven storey. The entrances to the above ground floors are designed from balconies, which are roofed and situated on the edge of the object. The footprint dimensions are 57,6 x 57,6 m. Variants are compared based on weight and size of the coating surfaces supporting construction of the object. Drawing documentation, static calculation of joints and details of the construction are processed for the best variant.
|
|
|
Belt conveyor for crushed limestone
Salvet, Patrik ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
The bachelor’s thesis is focused on design and calculation of a belt conveyor for transportation of crushed limestone with a transport capacity of 105,000 kg/h, axial distance of 45 m and height difference of 8.5 m. The thesis contains a description of individual components of the belt conveyor, transported material and functional calculation of the conveyors drive including forces acting on the belt which was performed according to the standard ČSN ISO 5048. The thesis also contains selection of individual components of the belt conveyor and their strength calculation for chosen limit states. At last, the drawing documentation of conveyor assembly and stand weldment was made.
|
|
|
Belt conveyor for sand dumps
Czerner, Marek ; Kašpárek, Jaroslav (referee) ; Malášek, Jiří (advisor)
The aim of this bachelor thesis is to make design and calculation of belt conveyor for oblique transport of gravel sand fraction 0 - 4 millimetres with the capacity of 70,000 kg per hour, axial distance of 15 m and a slope of 18 °. This thesis includes a brief description of the main parts of the belt conveyor, the functional calculations according to standard ČSN ISO 5048, the determination of the main dimensions, the choice of structural elements, the design of the drive and an overview of manufacturers of similar devices. It is also performed stress analysis of the casing and shaft of the driven drum. To the thesis is attached all the necessary technical drawings and the control calculation of the support pins.
|
|
|
Belt conveyor
Dušek, Josef ; Vladyka, Pavel (referee) ; Špička, Jiří (advisor)
This graduation thesis describes the construction design of belt conveyor, forming part of coaling system in thermal power station. It contains basic structural design, functional computation and strength calculation of the selected components. Another proposal is design of supporting construction for one section from conveyor routes, including static calculation.
|
|
|
Belt conveyor for crushed limestone
Salvet, Patrik ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
The bachelor’s thesis is focused on design and calculation of a belt conveyor for transportation of crushed limestone with a transport capacity of 105,000 kg/h, axial distance of 45 m and height difference of 8.5 m. The thesis contains a description of individual components of the belt conveyor, transported material and functional calculation of the conveyors drive including forces acting on the belt which was performed according to the standard ČSN ISO 5048. The thesis also contains selection of individual components of the belt conveyor and their strength calculation for chosen limit states. At last, the drawing documentation of conveyor assembly and stand weldment was made.
|
|
|
Belt conveyor for sand dumps
Czerner, Marek ; Kašpárek, Jaroslav (referee) ; Malášek, Jiří (advisor)
The aim of this bachelor thesis is to make design and calculation of belt conveyor for oblique transport of gravel sand fraction 0 - 4 millimetres with the capacity of 70,000 kg per hour, axial distance of 15 m and a slope of 18 °. This thesis includes a brief description of the main parts of the belt conveyor, the functional calculations according to standard ČSN ISO 5048, the determination of the main dimensions, the choice of structural elements, the design of the drive and an overview of manufacturers of similar devices. It is also performed stress analysis of the casing and shaft of the driven drum. To the thesis is attached all the necessary technical drawings and the control calculation of the support pins.
|
|
|
Dimensioning of Supporting Constructions for MV Overhead Lines
Křepela, Pavel ; Novotný, Jan (referee) ; Orságová, Jaroslava (advisor)
The reason of supporting constructions is to transfer all power activity and fulfill all requirements on safe operation of electrical grid. This bachelor’s thesis deals with designing of supporting constructions of the overhead line MV. The main task is to acquire knowledges about single parts of supporting constructions and to describe steps of power effects calculation according to current legislation. The outcome is a simple software application for supporting constructions design from power effect viewpoint.
|
|
|
Office Centre
Ďureje, Andrej ; Šmak, Milan (referee) ; Pilgr, Milan (advisor)
The content of diploma thesis is designing, project development and static estimation of the supporting steel structure in two different variants of the atypical office building (business center). The object is located in densely built-up location in the Brno. The building is designed as a seven storey. The entrances to the above ground floors are designed from balconies, which are roofed and situated on the edge of the object. The footprint dimensions are 57,6 x 57,6 m. Variants are compared based on weight and size of the coating surfaces supporting construction of the object. Drawing documentation, static calculation of joints and details of the construction are processed for the best variant.
|
guest ::
